1. Functions:
1) Adjust the position switch to change the output voltage, used as an adapter suitable for most of laptops and notebooks in the market.
2) Used as a charger, to charge the laptop battery directly without having to fix the battery to the laptop or notebook,suitable for over 95% of laptop batteries in the market with different connecting wires.
3) Gain the information from battery protective plate; achieve to adjust the output voltage and output current automatically.
4) Intelligent protection against over current, over voltage, over charge, over heat, short circuit and so on.
5) With the repair zero voltage battery function.
6) Charge your USB peripherals with the USB port, such as Mobile phones, MP3/MP4 players, Digital cameras, etc.
7) Simplify charging process, save your time and keep your laptop in good condition, especially if you own two batteries or more.
2. Basic parameters
Model: RFNC9
Color: black
Size: 155*62*36mm
Net weight: 280g
Input voltage: AC 100-240V
Output voltage: 6-24V
Output current: 4.5A max
Max output power: 90W
Standby power consumption :< 1.2W
USB output voltage: 5V
USB output current: ≤1.5A
Work temperature: 0℃～40℃/20%～90% RH(Non Condensing)
Storage Temperature; -20℃～65℃/10%～95% RH(Non Condensing)
Safety Standard: CE standard (UL, CB, GS, T-Mark etc. can be made as customers’ requirements)
Warranty: one year
3. Charging Instructions
1) LED1 is on after power on, then goes into standby mode.
2) Enter the battery charging mode, and start to charge when connecting with the battery in right way.
LED1, LED2, LED3, LED4, LED5, LED6, LED7 indicate the charge status as following:
|
Charging LED Status
|
Capacity Percentage
|
|
All the seven LEDs blink circularly
|
<15%
|
|
LED1 is on. The other six LEDs blink circularly
|
<29%
|
|
LED1 and LED2 are on. The other five LEDs blink circularly
|
<43%
|
|
LED1, LED2 and LED3 are on. The other four LEDs blink circularly
|
<57%
|
|
LED1, LED2, LED3 and LED4are on. The other three LEDs blink circularly
|
<71%
|
|
LED1, LED2, LED3, LED4, LED5 are on. LED6 and LED7 blink circularly
|
<85%
|
|
LED1, LED2, LED3, LED4, LED5, LED6 are on. LED7 blink
|
<100%
|
|
All the Seven LEDs are on
|
=100%
|
3) Abnormal charging status: LED1, LED2, LED3, LED4 blink simultaneously in frequency 2 HZ.
4) Return to stand-by mode when disboard the battery, LED1 is on.
5) Enter the adapter working mode after connecting with the adapter wire, Adjust the switch to change the output voltage before connecting the laptops/notebooks. (After connect with the laptops/notebooks, the position switch is invalid.
LEDs indicate the voltage as following:
|
LED status
|
LED1 on
|
LED2 on
|
LED3 on
|
LED4 on
|
LED5 on
|
LED6 on
|
LED7 on
|
|
Output voltage
|
15V
|
16V
|
18V
|
19V
|
20V
|
22V
|
24V
|
6) Output voltage ≤20V, maximum current is 4.5A.
Output voltage =22V, maximum current is 4A.
Output voltage =24V, maximum current is 3.5A.
7) USB output voltage 5V, maximum current 1.5A, can charge mobile phones, MP3, MP4, digital camera, etc. digital USB peripherals by different connectors.
4. Cautions
1) Please use the connecting wire of the adapter offered by us. Check the voltage of laptops/notebooks before using the adapter, then adjust the switch to get the suitable voltage status.
2) Before charging your laptops/notebooks battery, check the connecting wire and connect the wire with battery in right way, then start to charge.
3) To avoid explosion and danger, damaged batteries and leaking batteries are not allowed.
4)This product is good for indoors. Do not expose and use it in outdoors.
5) Do not drop or put something heavy on it. Children are not allowed to use the product without adults.
6) The operation temperature must be 0℃--40℃.
7) Do not keep the product under the direct rays, beside the hot devices or in other hot environment.
8) Do not disassemble or assemble the product.
